







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCabinet Installation Cost in Enterprise, NV: What the Per-Foot Guides Leave Out
Cabinet installation in a typical Enterprise tract kitchen runs $150-$275 per linear foot installed, which puts most full kitchens between $4,000 and $13,000 in cabinets alone. But those numbers assume three things: the walls are plumb, the ceiling is at standard height, and the soffit above the uppers won’t need demolition or framing work. In a 1990s builder-grade Enterprise home, at least one of those assumptions usually fails. Call Rowan Construction Group Enterprise at (833) 630-4077 for a written price that accounts for the real scope before anyone lifts a cabinet.
We’re a construction contractor working under The Haven Standard, founded in 2007, with 4,000-plus projects delivered - every one quoted with a flat written price before work began. If you’ve been comparing cabinet installation estimates in the southern Las Vegas Valley, here’s what the online cost calculators skip.

Why the Per-Foot Number Breaks Down in Enterprise Tract Homes
Enterprise is overwhelmingly tract housing built from the 1990s through the 2020s: two-story Mediterranean stucco homes with concrete tile roofs, on small lots in master-planned subdivisions. The original kitchens in these homes share a pattern. Thirty-inch upper cabinets. A standard eight-foot ceiling. And a painted drywall soffit filling the space between the top of the uppers and the ceiling.
That soffit is the variable costing homeowners the most money right now. The current standard for uppers is 42 inches. Getting there means one of two things:
- Soffit demolition and drywall repair: tear out the soffit, patch and finish the drywall, and repaint so the new taller uppers sit clean against the ceiling. In Enterprise kitchens we typically scope this at $400-$900 depending on linear footage and whether any wiring or ductwork runs through the soffit cavity.
- Full-height filler panel strategy: leave the soffit in place and extend the cabinets to the ceiling with a matching filler or a stacked box on top. Different look, different cost, and not every cabinet line offers it cleanly.
That gap is a scope variable worth $800-$2,500 to the bottom line, and most flat per-foot quotes never mention it. When a customer in an Enterprise subdivision tells us a competing quote came in surprisingly low, nine times out of ten the soffit wasn’t in the number. We put it in the written price up front, because no work starts and no change proceeds without a signed change order - the discipline that keeps Rowan projects within a few percent of the agreed cost.
KraftMaid vs. Wellborn: What the Cabinet Line Actually Buys You
Rowan’s entry-tier specified line is KraftMaid semi-custom, which lands at $8,000-$14,000 installed in a small-to-mid kitchen here. Wellborn full-custom runs $12,000-$20,000. The difference isn’t marketing. It’s three things our crews measure and our quotes name explicitly:
- Cabinet depth: standard 12-inch-deep uppers vs. deeper boxes that actually hold a dinner plate.
- Box construction: plywood vs. particleboard sides. Plywood holds screws under load and survives a Vegas summer without swelling.
- Hardware grade: soft-close hinges and full-extension drawer slides, specified by brand and grade in the quote - not chosen at the job site after the cabinets are already hung.
We source cabinetry and finishes across 50-plus vetted brands: KraftMaid and Wellborn for cabinets, Silestone and Caesarstone for the countertop that goes on top of them, Moen and Kohler for the fixtures nearby. The reason that matters on a cost page is simple. A contractor with one cabinet line quotes what they have. A contractor with fifty quotes what fits your kitchen and your budget. If you want to see how the cabinets tie into the larger project, our Kitchen Remodeling page walks through the full sequence.

Cabinet Installation Cost in Enterprise, NV: Line-Item Ranges
Here’s how the work prices out in this market. These are installed ranges - labor, materials, and finish work included.
| Item | Typical Range |
|---|---|
| Cabinet installation (full kitchen, small-to-mid) | $4,000-$13,000 |
| KraftMaid semi-custom cabinets, installed | $8,000-$14,000 |
| Wellborn full-custom cabinets, installed | $12,000-$20,000 |
| Soffit demo and drywall repair | $400-$900 |
| Countertop installation | $2,000-$6,500 |
| Backsplash installation | $800-$2,500 |
| Kitchen island installation | $3,000-$10,000 |
| Full kitchen remodel (cabinets included) | $14,000-$45,000 |
The full remodel figure is the context line: cabinets are usually the largest single line item in a kitchen project, and they set the budget for everything downstream. Our Kitchen Remodeling in Enterprise page breaks down how the trades sequence together.
Common Local Scenarios We Price in Enterprise
After enough kitchens in this valley, the variables start rhyming. These are the situations that show up most often:
- The 8-foot ceiling with a painted soffit. Most common scenario in Enterprise’s 1990s subdivisions. Priced with the soffit work included, not buried as an “unforeseen condition.”
- The stucco tract wall that’s out of plumb. Framing in fast-built tract housing varies. Our installers scribe and use filler strips to close gaps rather than caulking over misalignment. That finish-quality standard shows up in the photo record on every visit, and if a door or drawer drifts out of alignment after installation, the 365-Day Done Right Promise covers it.
- The kitchen island with outlets. Straight cabinet replacement in Clark County doesn’t need a building permit when the footprint stays the same and no plumbing or electrical moves. But adding an island with electrical outlets does trigger a permit. We flag the permit trigger in the written quote so the timeline makes sense from the start - this is a county permitting community, not a city one.
- The heat-and-sun retrofit. With summer highs above 105°F and intense UV year-round, cabinet finishes near a west-facing window take a beating. We specify finish grade accordingly and note it in the quote.
One more thing worth stating plainly: we don’t do this alone. Rowan connects Enterprise homeowners with independent local professionals who perform the work - background-checked, uniformed technicians with up to 19 years of experience, calls answered by a live person 24/7, and a documented photo record on every visit as a standard deliverable. Start at our home page to see the seven trades we cover.
FAQs
Cabinet installation in Enterprise typically runs $4,000-$13,000 for a full kitchen, or $150-$275 per linear foot installed. KraftMaid semi-custom lands at $8,000-$14,000 installed and Wellborn full-custom at $12,000-$20,000. The variable that moves the number most is soffit work: if your 1990s home has a painted drywall soffit above 30-inch uppers, add $400-$900 for demo and repair, or budget for a filler-panel strategy instead. Call (833) 630-4077 for a written price on your actual kitchen - the estimate is free.
No, a straight cabinet replacement in Clark County does not require a building permit when the footprint stays the same and no plumbing or electrical is relocated. Adding a kitchen island with electrical outlets does require a permit. We identify the permit trigger in the written quote so you know what’s included and what affects the project timeline before work starts. Call (833) 630-4077 if you’re unsure which category your project falls into.
Refinishing is cheaper up front - but only when the boxes are sound, which is the deciding question. Solid plywood boxes with working hardware are worth refinishing. Particleboard boxes that have swelled or hinges pulling out of stripped screw holes are not; you’ll spend the money twice. Our crews inspect box construction and report what we find in plain terms, with a photo record, before recommending either path. Bring us a competing estimate and we’ll review it line by line at no charge. Call (833) 630-4077 for a second opinion.
No. Cabinet installation is a multi-day project once you account for tear-out, soffit work if needed, drywall and paint, cabinet hang, hardware, and the countertop template that follows. What we can promise is a flat written price before anyone starts, no change proceeding without a signed change order, and a photo record when the crew leaves. Call (833) 630-4077 to schedule an on-site measurement and get your number in writing.
Get Your Cabinet Number in Writing
One phone call gets you a free on-site measurement and a flat written price - the soffit work, the hardware grade, the permit question, all of it scoped before anyone picks up a tool. Bring a competitor’s estimate and we’ll review it line by line at no charge. Call Rowan Construction Group Enterprise at (833) 630-4077.
Written by the team at Rowan Construction Group Enterprise, serving Enterprise, NV.
What Our Customers Say
"Fence and retaining wall along a sloped boundary. They photographed the footing depth at each post, which mattered when the county inspector came."
- Iona F."Final invoice was within two percent of the contract. Every change was priced and signed before anyone picked up a tool."
- Malcolm T."Driveway replaced properly with a base that will actually last. They explained why the cheaper quote was cheaper."
- Reggie O.












