







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Tub-to-Shower Conversion Cost in Enterprise?
A tub-to-shower conversion in Enterprise typically costs $3,500 to $10,000, with most homeowners landing between $5,200 and $7,800 for a standard alcove tub swapped for a tiled shower with a bench and a linear drain. The low end covers a prefabricated acrylic pan and surround; the high end covers custom tile, frameless glass, and moving the drain or valve to a new wall. We give you a flat written price for the Enterprise job before anyone picks up a tool, so the number you screenshot is the number you pay.
Key takeaways:
- Most Enterprise conversions run $3,500 – $10,000, driven mostly by tile choice and whether plumbing moves.
- The tub drain and shower drain sit in different spots in most Enterprise homes, and relocating one is the single biggest line-item swing.
- Waterproofing is where cheap quotes hide problems – ask what membrane they use and whether a flood test is done.
- Our technicians have up to 19 years of experience, and every visit includes a documented photo record at no add-on cost.

Tub-to-Shower Conversion Cost Breakdown (2026)
Here is what the work breaks into for a typical Enterprise conversion. These are real price bands, not ranges pulled from a national average calculator, and they reflect what we quote on tub-to-shower jobs in the valley.
| Line item | Typical cost (Enterprise, 2026) |
|---|---|
| Demolition and haul-away of the old tub and surround | $300 – $700 |
| Shower pan or mud-set base (acrylic to custom) | $400 – $1,600 |
| Waterproofing membrane and flood test | $450 – $1,200 |
| Wall tile, setting materials, and grout (per square foot installed) | $18 – $45 sq ft |
| Valve, trim, and showerhead (Kohler, Toto, or comparable) | $350 – $1,400 |
| Frameless glass enclosure or door | $700 – $2,500 |
| Drain relocation or valve movement (if needed) | $600 – $2,000 |
| Niche, bench, and grab bar blocking | $250 – $900 |
| Floor tile outside the shower and paint touch-up | $400 – $1,200 |
| Full conversion, project total | $3,500 – $10,000 |
The swing between a $3,500 job and a $10,000 job almost always comes down to three things: whether the drain moves, whether the wall tile is porcelain or natural stone, and whether the glass is framed or frameless. A builder-grade acrylic surround with a sliding door sits at the bottom. A floor-to-ceiling porcelain tile wall with a frameless panel and a linear drain sits at the top. The plumbing rough-in, the waterproofing, and the labor hours are nearly identical between the two – it’s the materials and the finish detail that move the number.
If you’re also touching other parts of the room, we publish the same kind of line-item pricing for a full bathroom remodel in Enterprise, which already includes the shower in its written scope. The comparison is worth running before you decide how far to take the project.
What Affects Tub-to-Shower Conversion Pricing in Enterprise
Enterprise homes were built in waves – a lot of the housing off Silverado Ranch and along the 215 corridor dates to the 1990s and 2000s, and the older tracts near Mountain’s Edge and Southern Highlands have their own plumbing quirks. That matters because a conversion that looks simple on paper can change once the wall opens. Here are the factors that move the price, and why.
- Drain location. A tub drain sits at one end of the alcove; a shower drain needs to sit centered or offset to a specific pan. In most Enterprise alcove tubs, that means cutting the subfloor and re-routing the trap, which runs $600 – $2,000. A linear drain can sometimes avoid moving the trap, but it needs a sloped mud bed, so you trade one cost for another.
- Valve and supply height. Tub fillers sit low; shower valves sit around 42 to 48 inches up. If the supply lines already run to that height in your wall, the swap is straightforward. If not, we open the wall, extend the copper or PEX, and re-solder or press – a $250 to $700 line depending on access.
- Waterproofing system. This is where the honest contractors separate from the cheap ones. A bonded sheet membrane or a liquid-applied system with a flood test runs $450 – $1,200 and takes a day. Skipping it is how showers fail in Southern Nevada’s dry climate, where the tile shrinks and the grout cracks as the slab and framing move with the seasonal swing. Under Clause 1 of The Haven Standard, we write the waterproofing method into the quote so you can compare it line by line against any other bid.
- Tile selection. Porcelain runs $3 to $12 per square foot at the material level; natural stone like travertine or marble starts at $8 and can hit $30 or more. Installed, that spreads to $18 – $45 per square foot. This is the largest discretionary line in the budget, and the one most worth slowing down on.
- Glass. A framed sliding door ($700 – $1,200) versus a frameless fixed panel with a hinged door ($1,400 – $2,500). The frameless panel needs a level curb and square walls; if the existing framing is out of plumb, we correct it first, which adds a few hundred dollars in carpentry.
- Permits. Clark County requires a permit when the conversion moves plumbing or adds a new drain location. Permit fees typically run $150 – $400 for a residential bathroom alteration, and the inspection adds a scheduled visit. We pull the permit in the scope and show the fee on the written quote rather than burying it.
One more local note: Enterprise sits on expansive clay soils in parts of the valley, and slab movement shows up as hairline cracks in the shower floor tile. If you’re converting, this is the moment to correct any slope issue in the pan rather than tiling over it. We note the condition of the substrate in the photo record so you can see exactly what we found and what we did about it.

How to Save on Tub-to-Shower Conversion
The ways to bring a conversion down in price are practical, not gimmicky. Start with what you can control before the crew arrives.
- Keep the plumbing where it is. If your tub is centered on the alcove and a centered shower drain works, you skip the $600 – $2,000 relocation line entirely. Ask your contractor early whether the existing trap can stay.
- Choose porcelain over natural stone. A large-format porcelain tile reads modern and costs a third of travertine installed. The waterproofing and labor are the same; only the material and setting change.
- Pick a framed or semi-frameless door over fully frameless. The $700 – $1,300 you save can go toward a better tile or a bench seat instead.
- Combine the conversion with a small bathroom refresh. If the vanity or floor is coming out anyway, doing the painting and floor tile in the same visit spreads the mobilization cost. Our Enterprise bathroom remodeling page shows how the line items stack when you widen the scope.
- Get a second opinion on any written estimate. Bring a competitor’s quote and we’ll review it line by line at no charge. This is a standing offer, not a sales call – if their number is honest, we’ll tell you so.
- Ask for a flat written price before work starts. No work proceeds on a change until the change order is signed, which is the discipline that keeps projects within a few percent of the agreed cost. You should never see a “final invoice” number that wasn’t on the original quote.
For a free estimate on your Enterprise conversion, call (833) 630-4077 – a live person answers, day or night, and we’ll put a written price in front of you before anyone schedules a demolition day.
Does Tub-to-Shower Conversion Cost More Than a Full Bathroom Remodel?
No. A tub-to-shower conversion runs $3,500 – $10,000 in Enterprise, while a full bathroom remodel runs $9,000 – $28,000 and a small bathroom remodel runs $5,000 – $12,000. The conversion is a targeted scope: it swaps the tub and surround for a shower, keeps the vanity, toilet, and floor in place, and finishes in a week or two rather than a month or more. The reason a full remodel costs more is that it touches everything at once – moving fixtures, adding lighting, reworking the layout. If your shower is the only thing failing, a conversion is the honest scope. Call (833) 630-4077 for a written line-item quote on the conversion, or ask us to compare it against a small bathroom remodel if you’re already planning to change the vanity.
What’s Included in a Rowan Tub-to-Shower Conversion Quote?
Every Enterprise conversion quote we write includes a flat price, a written scope, and a written warranty – never “call for a quote.” Here’s what the scope covers, and what it doesn’t, so there are no surprises on demo day.
- Flat written price for the full conversion, line-itemized: demolition, pan, membrane, tile, fixtures, glass, drain work, permit, and cleanup.
- Written scope naming the tile brand and series, the shower valve and trim brand (Kohler, Toto, or a comparable you approve), the membrane system, and the glass configuration.
- Written warranty issued at completion, plus the 365-Day Done Right Promise – if it’s not done right, we make it right.
- Documented photo record on every visit: the condition of the framing, the rough-in, the membrane before tile, and the finished install.
- Signed change orders only. If we find rot behind the tub surround or a corroded valve, we stop, document, and price the extra work in writing before we continue.
- Background-checked, uniformed technicians who arrive with the written quote you approved in hand.
We source across 50-plus vetted brands so the quote reflects honest material numbers. For the fixtures specifically, Kohler and Toto are on our approved list because their valve trim and rough-in kits are consistent enough that we can price them accurately rather than quoting a placeholder and adjusting later. For the substrate and wallboard, we source brands whose product line we can name in the scope – because a waterproofing system you can’t name is one you can’t inspect.
How Long Does a Tub-to-Shower Conversion Take in Enterprise?
Most conversions take 5 to 10 working days from demolition to final glass, assuming no hidden damage behind the tub surround. Here’s the realistic sequence for an Enterprise job:
- Day 1: Demolition, haul-away, and inspection of the framing and rough-in. Photo record started.
- Days 2 – 3: Plumbing relocation if needed, permit inspection scheduling, and substrate repair.
- Days 3 – 4: Waterproofing membrane install and flood test (24 hours minimum before tile).
- Days 4 – 7: Tile set, grout, and cure.
- Days 7 – 9: Valve trim, showerhead, drain cover, and glass template or install.
- Day 9 – 10: Final inspection, touch-up paint, cleanup, and the documented photo record delivered.
A custom glass panel that must be templated adds 5 to 10 business days for fabrication, which is the usual reason a job stretches to two weeks. We schedule the glass order on day one to shorten that gap. For a same-day answer on scheduling, call (833) 630-4077 – we answer live 24/7 and can tell you the earliest available demo date.
Why Does Waterproofing Matter More in Enterprise Than Elsewhere?
Because Southern Nevada’s humidity swings from the teens in June to 40 percent in monsoon season, and that cycle moves the framing and the substrate. A shower that’s waterproofed correctly handles that movement. One that isn’t will crack at the grout lines within a season or two, and the leak shows up on the ceiling below rather than at the shower itself. In Enterprise homes built between 1995 and 2010, we regularly see builder-grade tub surrounds with drywall behind the tile and no membrane at all – which is fine behind a tub that never leaks and a slow failure behind a shower that sees daily water. If your quote doesn’t name the membrane and describe a flood test, it’s the one thing to ask about before you sign. Under Clause 1 of The Haven Standard, that method is written into the scope, not left to the crew’s judgment on the day.
Should You Convert a Tub to a Shower or Replace It?
Convert if the tub is failing, unused, or a barrier you can’t step over. Replace if you want to keep soaking and the plumbing is sound. In dollars: a shower replacement runs $3,000 – $8,500 and keeps the existing footprint, while a conversion runs $3,500 – $10,000 and changes how the space works. Most of our Enterprise customers who convert are making the room safer to step into, or freeing up floor space in a small bathroom, and they tell us the tub was used as a laundry basket for years. If you’re keeping the tub and just refreshing the surround, a walk-in shower installation is the wrong scope – look at a shower replacement instead, which stays inside the existing footprint and keeps the plumbing where it is. Call (833) 630-4077 and we’ll tell you which scope your bathroom actually calls for after we see the condition of the surround.
How Much Does a Tub-to-Shower Conversion Cost in Enterprise if the Drain Moves?
Drain relocation adds $600 – $2,000 to the conversion, so a full project with a relocated drain runs $4,100 – $12,000. The cost splits into cutting and patching the subfloor ($150 – $400), re-routing the trap and drain line ($250 – $800), and the new pan set or mud bed ($200 – $800). If the tub is centered on the alcove, we can often center the shower drain without moving the trap at all, and you skip the whole line. The way to know is to have a technician open the access panel or pull the overflow plate and look – which is exactly what we do on a free estimate. Call (833) 630-4077 to schedule that look, and you’ll have a written price that day or the next.
What Should You Ask Before Choosing a Tub-to-Shower Contractor in Enterprise?
Ask five questions: what membrane system they use, whether they flood-test it, whether the permit is in the scope, what happens if they find water damage behind the surround, and whether the price is written before work starts. The answers separate a contractor who plans the job from one who quotes a number and improvises. Our answers: bonded sheet or liquid-applied membrane with a 24-hour flood test; permit in the scope with the fee shown on the quote; hidden damage priced in a signed change order before we proceed; and a flat written price before anyone picks up a tool. Every crew member is background-checked and uniformed, every visit gets a documented photo record, and if it’s not done right within 365 days, we make it right. Enterprise homeowners who research the way they research appliances will find the three-star reviews and the fine print – so we’d rather put the method in the scope than ask for trust.
FAQs – Tub-to-Shower Conversion Cost in Enterprise
How much does a tub-to-shower conversion cost in Enterprise?
It typically costs $3,500 to $10,000, with most Enterprise projects landing between $5,200 and $7,800. The low end is a prefabricated acrylic pan and surround with a framed door; the high end is custom tile, a frameless glass panel, and a relocated drain. Call (833) 630-4077 for an exact quote – estimates are free and written.
Is it cheaper to convert a tub to a shower or remodel the whole bathroom?
Converting is cheaper. A conversion runs $3,500 – $10,000; a full bathroom remodel runs $9,000 – $28,000 and a small bathroom remodel runs $5,000 – $12,000. The conversion touches only the shower alcove, keeps the vanity and toilet, and finishes in 5 to 10 working days. Call (833) 630-4077 and we’ll compare both scopes against your bathroom in writing.
How much does the drain relocation add to a conversion in Enterprise?
Drain relocation adds $600 – $2,000, bringing a project with a moved drain to $4,100 – $12,000. Cutting and patching the subfloor, re-routing the trap, and setting a new pan all factor in. If the tub is centered, we can often skip the move entirely. Call (833) 630-4077 for a free look – we’ll tell you which side of that range your bathroom is on.
Can you do a tub-to-shower conversion in Enterprise in one day?
No. Most conversions take 5 to 10 working days because tile needs grout cure time and the membrane needs a 24-hour flood test before tile goes on. A prefabricated acrylic surround can shorten it to 3 to 4 days, but the plumbing relocation and permit inspection still add time. For the earliest available demo date, call (833) 630-4077 – a live person answers 24/7.
Does a tub-to-shower conversion need a permit in Enterprise?
Yes – Clark County requires a permit when the conversion moves the drain or supply lines, and the typical residential bathroom alteration permit fee runs $150 – $400. The permit and the inspection are written into the scope, not left as a surprise line. Call (833) 630-4077 and we’ll tell you whether your specific conversion triggers the permit requirement.
What’s the cheapest way to convert a tub to a shower in Enterprise?
Keep the drain and plumbing where they are, use large-format porcelain tile instead of natural stone, and choose a framed or semi-frameless door over fully frameless. That combination lands at the bottom of the $3,500 – $10,000 range. The cheapest path that still holds up is a prefabricated acrylic pan with a bonded membrane behind the tile – skip the membrane and you’ll replace the whole shower sooner than you think. Call (833) 630-4077 for a written quote at that scope.
Do you offer a warranty on tub-to-shower conversions in Enterprise?
Yes – every conversion carries a written warranty at completion plus the 365-Day Done Right Promise: if it isn’t done right, we make it right. The written price, written scope, and written warranty are issued before and after the work, never as a verbal promise. We also review any competitor’s written estimate line by line at no charge; call (833) 630-4077 to arrange that second opinion.
Get a Written Tub-to-Shower Price for Your Enterprise Home
If you’re weighing a conversion, the useful next step is a written price specific to your bathroom, not another article. We’ll open the access panel, check the surrounding framing, confirm whether the drain can stay, and hand you a flat written price and scope before anyone schedules a demo. If the condition behind the surround is good, we’ll show you in the photo record. If it’s not, we’ll price the repair in a signed change order before proceeding – never after. Our technicians have up to 19 years of experience, and the whole quote starts at no cost.
Call (833) 630-4077 for a free estimate on your tub-to-shower conversion in Enterprise. A live person answers 24/7, and you can text us a photo of the tub to speed up the first conversation. For the full range of what we build across the valley, see our Enterprise service area page.
Pricing reflects the Enterprise market as of 2026. Rowan Construction Group Enterprise offers free estimates – call (833) 630-4077.
Written by the team at Rowan Construction Group.
What Our Customers Say
"Fence and retaining wall along a sloped boundary. They photographed the footing depth at each post, which mattered when the county inspector came."
- Iona F."Final invoice was within two percent of the contract. Every change was priced and signed before anyone picked up a tool."
- Malcolm T."Driveway replaced properly with a base that will actually last. They explained why the cheaper quote was cheaper."
- Reggie O.












