







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Enterprise Homeowners Choose KraftMaid Construction
We provide independent KraftMaid construction service in Enterprise, Nevada: cabinet installation, refacing, kitchen design, and small or partial kitchen remodels built around the KraftMaid boxes, doors, and finishes already in your home. What sets our KraftMaid work apart is that we’re not a dealer. We’re an independent contractor, so our recommendations come from how KraftMaid cabinets actually perform in Enterprise’s dry desert air, not from a sales script. We’re not affiliated with, authorized by, or sponsored by KraftMaid, and we say so plainly.
If your Vantage or Momentum doors aren’t sitting flush, or you’re adding cabinets to an existing KraftMaid kitchen, call (833) 630-4077 for a free written estimate before any work starts.
Why Trust Rowan Construction Group Enterprise for Your KraftMaid Construction?

Our technicians have up to 19 years of experience, and that time has been spent in the same kind of tract kitchens you own: framed KraftMaid boxes, full-overlay doors, painted and stained finishes from the Momentum line, all-plywood Vantage boxes, and the occasional frameless install. They know how a KraftMaid box is built, how door fronts hang on their hinges, and where these cabinets wear first in a low-humidity house.
When a part is needed, we match KraftMaid OEM hinges, glides, fillers, and touch-up finish wherever the line is still supported. Where OEM parts are discontinued or priced out of proportion to the job, we’ll use quality aftermarket Blum-style hardware and tell you exactly why. Nothing gets swapped without you knowing what went in.
Our work is warranty-safe. We don’t drill through a manufacturer finish or modify a box in a way that puts a KraftMaid warranty claim at risk, and we’ll explain what the warranty still covers before we touch anything. Every job finishes with a written scope, a documented photo record, and the 365-Day Done Right Promise behind it. Under Clause 1 of the Haven Standard, the price is written before anyone starts.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Enterprise
Here’s what we actually see on KraftMaid cabinets across Enterprise’s 1990s-through-2020s subdivisions, and why each one happens.
- Painted Vantage and Momentum doors checking, shrinking, or peeling at stile edges. In a desert house, indoor relative humidity can drop into the teens for months. Painted MDF and painted wood door fronts lose moisture through their edges faster than through the face, so the paint film at the stile opens hairline checks first. Left alone, the checks become peeling paint at the edge that catches on your hand.
- Soft-close hinges and drawer glides losing adjustment or sagging. After eight or ten years of daily open-and-close, a soft-close hinge mechanism loses its damping and stops holding the door square. The door drops a few millimeters and starts rubbing the adjacent frame. It’s a hardware problem, not a cabinet problem, and it’s usually fixable with a replacement hinge set.
- Box components swelling or crumbling near a slow leak. KraftMaid boxes that contain particleboard or MDF components are fine dry. They are not fine wet. A dishwasher supply line that has been weeping for a year, or a sink base that gets splash every day, will swell the substrate under the floor of the cabinet. The swelling shows up as a soft spot or a debonded finish before it shows up as a visible stain.
- Toe-kick, filler strips, and crown molding pulling loose. Enterprise homes sit on tile floors laid over slab, and slabs move slightly over a decade. Cabinet boxes settle against that tile and against shifting wall framing. The trim that was attached tight at install opens a gap at the toe or the crown. It’s cosmetic until it exposes a raw edge.
- Doors rubbing the frame after a countertop or floor change. When a countertop gets replaced or a floor gets raised, cabinet boxes shift slightly and a door that used to clear its neighbor no longer does. It’s the most common call we get after a partial kitchen remodel, and the fix is a re-hang and re-align, not a new cabinet run.
KraftMaid Parts & Our Repair-vs-Replace Approach

We don’t stock KraftMaid parts locally. We source them per job: OEM hinges, glides, fillers, toe-kick, crown, and finish touch-up where the line is still supported, and quality aftermarket Blum-style hardware where the OEM part is discontinued or the cost doesn’t make sense against the value of the cabinet. You’ll see the part number and the price line on the quote before we order anything.
Repair is the right call when the boxes and doors are structurally sound: soft-close hardware replacement, door re-hang and re-align, trim reattachment, edge touch-up. When a run of painted fronts is failing across the whole kitchen, or a box has swelled past the point where a patch would hold, refacing or replacement is the honest recommendation. We’d rather tell you that than sell you a hinge job on a cabinet that needs to come out.
A typical KraftMaid cabinet call starts with doors that no longer sit flush, soft-close hinges out of adjustment, and stiles that have rubbed the adjacent frame, often in a kitchen where dry indoor air has also opened hairline checks in a painted Momentum or Vantage finish. A qualified local pro re-hangs and re-aligns the doors, replaces worn hinges and glides with matching hardware, touches up edge checks, and checks the boxes around the sink and dishwasher for swelling before recommending repair over refacing or replacement. Call (833) 630-4077 to schedule your free estimate and get a written price before any work starts.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We open every door, pull every drawer, and check the boxes at the sink base, the dishwasher bay, and any spot with a supply line nearby. We photograph the condition of the hinges, glides, stile edges, and box substrates, and we note the series and finish so the right parts get ordered.
- 2
Written scope and price. You get a flat written price with the parts list and the labor scope before anything is ordered or removed. No “call for a quote.”
- 3
Repair or install. Hinges and glides swapped to OEM-matching hardware, doors re-hung and re-aligned, trim reattached, edge checks touched up. For a new install or partial remodel, boxes are set to level against your actual floor and wall framing, not to the drawing.
- 4
Test and adjust. Every door closes flush, every drawer glides smooth, every soft-close mechanism cycles clean. We adjust on site until it does.
- 5
Warranty and record. You get the written warranty and the documented photo record of what was found and what was done. If anything isn’t right within a year, the 365-Day Done Right Promise applies.
KraftMaid Products We Service & Install in Enterprise
We work across the KraftMaid lines that show up in Enterprise homes: the Vantage series with its all-plywood box construction, the Momentum series with framed painted and stained finishes, Deluxe and Portrait full-overlay framed cabinetry, and KraftMaid’s frameless full-access cabinetry. That covers cabinet installation and refacing, kitchen design and layout, and small and partial kitchen remodels, including adding new KraftMaid boxes to an existing run. We source each order to the job; nothing is held in local stock.
See the difference
Before
After
Before
After
Before
AfterWe Also Service These Brands
KraftMaid is one line among many we work with. We also service Kohler fixtures and Toto toilets in the bathrooms that connect to these kitchens, GAF and Owens Corning roofing on the Enterprise tract homes above them, PGT windows and doors, and Master Halco fencing. Multi-brand work means the cabinet recommendation gets made against what’s actually in your house, not against a single manufacturer’s catalog.
KraftMaid Construction Pricing in Enterprise
Here are the ranges we quote for KraftMaid-related work in Enterprise. The written estimate always lands inside the range and is flat for the scope shown.
| Service | Typical Range in Enterprise |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Kitchen Remodel | $14,000 – $45,000 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Countertop Installation | $2,000 – $6,500 |
FAQs – KraftMaid Construction Service in Enterprise
No. We are an independent KraftMaid service provider, not an authorized KraftMaid dealer or representative, and we’re not affiliated with or sponsored by the manufacturer. We install, repair, and remodel around KraftMaid cabinets because we know how they’re built, not because KraftMaid endorses us.
Yes, wherever the line is still supported. We match KraftMaid OEM hinges, glides, fillers, toe-kick, crown, and touch-up finish on supported lines, and we use quality aftermarket Blum-style hardware only when the OEM part is discontinued or the cost is out of proportion to the job. Either way, the part number and price show up on the written quote before we order.
Hardware replacement and door re-alignment typically finish in a single visit. Cabinet installation runs one to three days depending on box count. Small kitchen remodels run one to three weeks. The written scope states the expected duration, and if the scope changes, a signed change order states the new timeline before work continues.
We service and install the Vantage series, the Momentum series, Deluxe and Portrait full-overlay framed cabinetry, and KraftMaid frameless full-access cabinetry. If you’re not sure which series you have, the door style and the box construction usually identify it, and we’ll confirm at the diagnosis.
Not if the work is done correctly. We don’t modify KraftMaid boxes or finishes in a way that puts a manufacturer warranty claim at risk, and we’ll explain what the warranty still covers and what it doesn’t before we touch anything. Anything we do is also backed by our own 365-Day Done Right Promise, which is separate from the manufacturer’s warranty.
Cabinet installation runs $4,000 – $13,000, a small kitchen remodel $9,000 – $20,000, a full kitchen remodel $14,000 – $45,000, a kitchen island $3,000 – $10,000, and countertop installation $2,000 – $6,500. The written estimate is a flat price for the scope shown, so you know the number before work starts. Call (833) 630-4077 for an exact quote; estimates are free.
Book Your KraftMaid Service in Enterprise, NV

Whether it’s four hinges, one door front, or a full KraftMaid kitchen remodel in Enterprise, the process is the same: a written price before anyone starts, a documented photo record, and the 365-Day Done Right Promise behind it. Call (833) 630-4077 to schedule your free estimate. Bring a competitor’s quote if you have one and we’ll review it line by line at no charge.
Written by the team at Rowan Construction Group Enterprise.












