A Rowan company - serving Enterprise, NV
A remodeled primary bathroom with a soaking tub and a walk-in shower
Toto · Enterprise

Toto Construction Service in Enterprise, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Enterprise
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A remodeled hall bathroom with subway tile and a floating vanity
New painted shaker cabinets with an organized deep drawer
A remodeled kitchen with a waterfall island and wood cabinets
A finished backyard cottage with a small covered porch
A new roof with clean valleys and new flashing
A new multi-panel patio door opening a kitchen to the patio
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Enterprise Homeowners Choose Toto Construction

Rowan Construction Group Enterprise provides independent Toto construction service in Enterprise, NV: we specify, install, and troubleshoot Toto fixtures inside full bathroom and kitchen builds, and we repair the ones already in your home. What makes our Toto work different is that the fixture is never treated as an afterthought to the tile. The rough-in, the water supply, the GFCI outlet, and the drain get planned around the exact Toto model before a single piece of backer board goes up.

Call (833) 630-4077

We’re not affiliated with or authorized by Toto. We’re an independent Toto service provider, and we say so plainly. Our technicians have up to 19 years of experience with the Drake, Ultramax II, Washlet seats, and EcoPower sensors that fill Enterprise bathrooms. Every project gets a flat written price before work starts. Call (833) 630-4077 for a free estimate.

Why Trust Rowan Construction Group Enterprise for Your Toto Construction?

A tile setter installing wall tile in a shower

Enterprise is a master-planned, still-filling-in community in the southern Las Vegas Valley, built almost entirely from the 1990s through the 2020s. That shapes how we handle Toto work here. We’re rarely walking into a century-old bath with a cast-iron stack. We’re walking into a 2005 tract home where the builder-grade toilet is failing and the owner wants a Washlet that actually fits the bowl they already have.

Our technicians know the difference between a Drake CST743 and a CST746, and they know which of the two needs the G-Max valve kit rather than a generic flapper. We use genuine Toto OEM fill valves, flappers, wax rings, and Washlet control boards where the electronics or the flush geometry demand the exact fit. That’s the warranty-safe choice. A universal fill valve that “fits” a Drake can change the refill ratio and shorten the flush, and Toto won’t honor a claim on a fixture that’s been fitted with mismatched internals.

Every visit includes a documented photo record as a standard deliverable. You’ll see the flange condition, the wax ring seat, and the shut-off placement before we cover anything up. Under Clause 1 of the Haven Standard, the price is written before anyone starts.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Toto Construction Problems We Fix in Enterprise

These are the Toto issues we actually see in Enterprise homes, not a generic troubleshooting list pulled from a manual.

  • Washlet seat leaking internally and control board failure. The C100, C200, and S500e bidet seats run a self-cleaning wand that draws water through an internal line. In Enterprise’s hard water, mineral scale builds in that line and the seat sensors, and eventually the board shorts or the wand drips into the housing. The fix is usually a wand assembly and board replacement, not a new seat.
  • Drake G-Max flush valve wear at the flapper and fill valve. The CST743 and CST746 series use the G-Max flush tower. After years of cycling, the flapper seal hardens and the fill valve drifts, so the tank runs and the flush gets short and weak. A fresh OEM flapper and fill valve restores it. This is a $60 part problem, not a $600 toilet problem.
  • Tornado flush rim jets clogging in hard-water areas. Toto’s Tornado flush pushes water through rim jets that scale up over time. Flush power drops and owners assume the toilet is dying. It isn’t. It needs a manual descale of the rim jets with a screwdriver and a mirror, not a replacement.
  • Wax ring and flange corrosion under one-piece Ultramax II units. When a one-piece bowl rocks on the floor, the wax ring seal breaks and the flange corrodes. In a remodeled Enterprise bath with new tile, that shows up as slow seepage at the floor line. We reset the flange and fit a fresh wax ring before the toilet goes back down.
  • EcoPower sensor faucet failure after UV exposure. Enterprise summers routinely top 105°F, and the EcoPower faucet’s self-generating turbine and sensor window degrade faster in high-UV, low-humidity kitchens. We test the sensor and the turbine before recommending a rebuild or a swap.

Toto Parts & Our Repair-vs-Replace Approach

A new casement window over a kitchen sink

We don’t claim to stock Toto parts, and we don’t keep a local warehouse. Parts are sourced per job from Toto’s dealer network, which means the right part arrives rather than a universal substitute that “should work.”

Genuine Toto OEM parts go in where the fixture’s electronics or flush geometry demand the exact fit: fill valves, flappers, wax rings, and Washlet control boards. Aftermarket is fine for supply lines and common hardware where fit isn’t load-bearing.

The repair-versus-replace call is honest. A working Drake or Ultramax bowl usually deserves a repair, not a swap. A 15-year-old Washlet board that costs more than a replacement seat gets replaced, and we’ll tell you that before you spend the money. Bring a competitor’s written estimate and we’ll review it line by line at no charge. Call (833) 630-4077 for your free second opinion.

Our Toto Service Process – Step by Step

  1. 1
    Diagnosis. We identify the exact Toto model and series from the stamp inside the tank or under the bowl, then check the flush valve, the rim jets, the supply line, and the flange. On a Washlet, we test the wand, the sensors, and the board separately so we’re not guessing at the failure point.
  2. 2
    Repair or install. For a repair, we fit the OEM part matched to the model. For an install, we set the rough-in to Toto’s published dimensions, add a GFCI outlet and a shut-off near the fixture if the rough-in calls for one, and seal the flange before the bowl is set so it doesn’t rock.
  3. 3
    Test. We run a full flush cycle, check for tank running, verify the Washlet wand and heat functions, and confirm the fixture sits level. We photograph the flange and the connection points.
  4. 4
    Warranty. You get the written warranty on the work, the documented photo record, and the 365-Day Done Right Promise. If it’s not done right, we make it right. No change proceeds without a signed change order.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Toto Products We Service & Install in Enterprise

A new white vinyl privacy fence with a double gate

We work across the Toto lines that actually appear in Enterprise homes: the Drake CST743 and CST746 two-piece toilets, the Ultramax II one-piece, and the Washlet bidet seats including the C100, C200, and S500e series, plus the EcoPower sensor faucets in kitchens and powder rooms.

We also service Toto fixtures inside larger scopes: full bathroom remodeling, walk-in shower installation, and tub-to-shower conversion. In a typical tub-to-shower conversion, the existing Toto toilet and its Washlet seat get pulled and set aside so the old fiberglass tub can come out and a walk-in shower pan can be laid. Reinstalling the toilet often exposes a rusted flange or a wax ring that’s been seeping. A qualified pro resets the drain flange, fits a fresh wax ring, checks that the Washlet’s water supply and outlet sit clear of the new shower glass, and re-levels the toilet so it doesn’t rock.

We Also Service These Brands

Enterprise homeowners rarely buy one brand top to bottom, and we don’t expect them to. Alongside Toto, we install and service KraftMaid cabinets, Kohler fixtures, GAF roofing, and PGT windows and doors. The written quote covers the whole scope across seven trades, with the same flat pricing and the same signed change order before any work starts. One crew, one number, no brand-blind spot in the plan.

FAQs – Toto Construction Service in Enterprise

Service Price Range
Bathroom Remodel $9,000 – $28,000
Walk-In Shower Installation $4,500 – $12,000
Tub-to-Shower Conversion $3,500 – $10,000
Bathroom Vanity Installation $800 – $3,000
Shower Replacement $3,000 – $8,500

Call (833) 630-4077 for an exact quote – estimates are free.

Book Your Toto Service in Enterprise, NV

Whether you’re repairing a Drake that’s lost its flush, keeping a Washlet through a tub-to-shower conversion, or specifying Toto fixtures into a full bathroom remodel, we’ll put the price in writing before anyone picks up a tool. Free second opinion on any written estimate. Background-checked, uniformed technicians. A live person answers calls 24/7. Call (833) 630-4077 to schedule your free estimate.

Written by the team at Rowan Construction Group Enterprise.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A garage converted into a guest room and home officeNew architectural shingles with a clean valleyA new stained cedar privacy fenceA new paver patio with a seat wall and fire pitA single-story rear room addition with tall windows and a new patioA new clay tile roof

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Enterprise

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Enterprise team

A local vetted partner works across Enterprise and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 630-4077
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Rowan Construction Group Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch