







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Enterprise Homeowners Choose Toto Construction
Rowan Construction Group Enterprise provides independent Toto construction service in Enterprise, NV: we specify, install, and troubleshoot Toto fixtures inside full bathroom and kitchen builds, and we repair the ones already in your home. What makes our Toto work different is that the fixture is never treated as an afterthought to the tile. The rough-in, the water supply, the GFCI outlet, and the drain get planned around the exact Toto model before a single piece of backer board goes up.
We’re not affiliated with or authorized by Toto. We’re an independent Toto service provider, and we say so plainly. Our technicians have up to 19 years of experience with the Drake, Ultramax II, Washlet seats, and EcoPower sensors that fill Enterprise bathrooms. Every project gets a flat written price before work starts. Call (833) 630-4077 for a free estimate.
Why Trust Rowan Construction Group Enterprise for Your Toto Construction?

Enterprise is a master-planned, still-filling-in community in the southern Las Vegas Valley, built almost entirely from the 1990s through the 2020s. That shapes how we handle Toto work here. We’re rarely walking into a century-old bath with a cast-iron stack. We’re walking into a 2005 tract home where the builder-grade toilet is failing and the owner wants a Washlet that actually fits the bowl they already have.
Our technicians know the difference between a Drake CST743 and a CST746, and they know which of the two needs the G-Max valve kit rather than a generic flapper. We use genuine Toto OEM fill valves, flappers, wax rings, and Washlet control boards where the electronics or the flush geometry demand the exact fit. That’s the warranty-safe choice. A universal fill valve that “fits” a Drake can change the refill ratio and shorten the flush, and Toto won’t honor a claim on a fixture that’s been fitted with mismatched internals.
Every visit includes a documented photo record as a standard deliverable. You’ll see the flange condition, the wax ring seat, and the shut-off placement before we cover anything up. Under Clause 1 of the Haven Standard, the price is written before anyone starts.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Enterprise
These are the Toto issues we actually see in Enterprise homes, not a generic troubleshooting list pulled from a manual.
- Washlet seat leaking internally and control board failure. The C100, C200, and S500e bidet seats run a self-cleaning wand that draws water through an internal line. In Enterprise’s hard water, mineral scale builds in that line and the seat sensors, and eventually the board shorts or the wand drips into the housing. The fix is usually a wand assembly and board replacement, not a new seat.
- Drake G-Max flush valve wear at the flapper and fill valve. The CST743 and CST746 series use the G-Max flush tower. After years of cycling, the flapper seal hardens and the fill valve drifts, so the tank runs and the flush gets short and weak. A fresh OEM flapper and fill valve restores it. This is a $60 part problem, not a $600 toilet problem.
- Tornado flush rim jets clogging in hard-water areas. Toto’s Tornado flush pushes water through rim jets that scale up over time. Flush power drops and owners assume the toilet is dying. It isn’t. It needs a manual descale of the rim jets with a screwdriver and a mirror, not a replacement.
- Wax ring and flange corrosion under one-piece Ultramax II units. When a one-piece bowl rocks on the floor, the wax ring seal breaks and the flange corrodes. In a remodeled Enterprise bath with new tile, that shows up as slow seepage at the floor line. We reset the flange and fit a fresh wax ring before the toilet goes back down.
- EcoPower sensor faucet failure after UV exposure. Enterprise summers routinely top 105°F, and the EcoPower faucet’s self-generating turbine and sensor window degrade faster in high-UV, low-humidity kitchens. We test the sensor and the turbine before recommending a rebuild or a swap.
Toto Parts & Our Repair-vs-Replace Approach

We don’t claim to stock Toto parts, and we don’t keep a local warehouse. Parts are sourced per job from Toto’s dealer network, which means the right part arrives rather than a universal substitute that “should work.”
Genuine Toto OEM parts go in where the fixture’s electronics or flush geometry demand the exact fit: fill valves, flappers, wax rings, and Washlet control boards. Aftermarket is fine for supply lines and common hardware where fit isn’t load-bearing.
The repair-versus-replace call is honest. A working Drake or Ultramax bowl usually deserves a repair, not a swap. A 15-year-old Washlet board that costs more than a replacement seat gets replaced, and we’ll tell you that before you spend the money. Bring a competitor’s written estimate and we’ll review it line by line at no charge. Call (833) 630-4077 for your free second opinion.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We identify the exact Toto model and series from the stamp inside the tank or under the bowl, then check the flush valve, the rim jets, the supply line, and the flange. On a Washlet, we test the wand, the sensors, and the board separately so we’re not guessing at the failure point.
- 2
Repair or install. For a repair, we fit the OEM part matched to the model. For an install, we set the rough-in to Toto’s published dimensions, add a GFCI outlet and a shut-off near the fixture if the rough-in calls for one, and seal the flange before the bowl is set so it doesn’t rock.
- 3
Test. We run a full flush cycle, check for tank running, verify the Washlet wand and heat functions, and confirm the fixture sits level. We photograph the flange and the connection points.
- 4
Warranty. You get the written warranty on the work, the documented photo record, and the 365-Day Done Right Promise. If it’s not done right, we make it right. No change proceeds without a signed change order.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Enterprise

We work across the Toto lines that actually appear in Enterprise homes: the Drake CST743 and CST746 two-piece toilets, the Ultramax II one-piece, and the Washlet bidet seats including the C100, C200, and S500e series, plus the EcoPower sensor faucets in kitchens and powder rooms.
We also service Toto fixtures inside larger scopes: full bathroom remodeling, walk-in shower installation, and tub-to-shower conversion. In a typical tub-to-shower conversion, the existing Toto toilet and its Washlet seat get pulled and set aside so the old fiberglass tub can come out and a walk-in shower pan can be laid. Reinstalling the toilet often exposes a rusted flange or a wax ring that’s been seeping. A qualified pro resets the drain flange, fits a fresh wax ring, checks that the Washlet’s water supply and outlet sit clear of the new shower glass, and re-levels the toilet so it doesn’t rock.
We Also Service These Brands
Enterprise homeowners rarely buy one brand top to bottom, and we don’t expect them to. Alongside Toto, we install and service KraftMaid cabinets, Kohler fixtures, GAF roofing, and PGT windows and doors. The written quote covers the whole scope across seven trades, with the same flat pricing and the same signed change order before any work starts. One crew, one number, no brand-blind spot in the plan.
FAQs – Toto Construction Service in Enterprise
Yes. We pull the Washlet seat and the toilet as a unit during the demolition phase, set them aside, and reinstall both once the new shower pan is in and the floor is finished. The one thing that frequently changes is the electrical: a Washlet needs a dedicated GFCI outlet near the fixture, and the shower glass layout determines where that outlet and the water supply clear the new enclosure. That’s a rough-in decision, so it has to be made before tile. Call (833) 630-4077 and we’ll walk through your layout.
Almost never. A weak Drake flush in Enterprise is usually a worn G-Max flapper and a drifting fill valve, or scaled-up Tornado rim jets from hard water. Both are repaired with OEM parts for a fraction of a new toilet. Flush power comes back once the rim jets are descaled and the valve stack is restored. Call (833) 630-4077 for an exact quote – estimates are free.
It adds one step, not a problem. A one-piece Ultramax II is heavier and can’t be separated into a tank and bowl, so it gets lifted out whole and protected during the tile work. The complication worth knowing: a one-piece bowl leaks slowly through a failed wax ring rather than visibly, so if the toilet was rocking before the remodel, we always replace the wax ring and check the flange while the floor is open. Call (833) 630-4077 for a free estimate.
Usually, if the bowl is elongated or the seat is a compatible round. Washlet seats mount on the bowl rim and reach the water supply with a T-fitting, so most standard toilets accept them. The fit fails on unusually shaped bowls or where the supply line is hard-piped with no room for the T-valve. We measure the bowl and check the supply before you buy. Call (833) 630-4077 for a quick fit check.
Yes. Tile, waterproofing membrane, glass, and the Toto fixture rough-in are one scope for us, not two contractors arguing over who set the drain. The membrane goes down first, the rough-in for the shower valve and the Toto fixture is confirmed before the pan is set, and the glass is templated after tile. That sequencing is what keeps the job from stalling. Call (833) 630-4077 to schedule a free estimate.
Bathroom work that includes Toto fixtures in Enterprise runs the ranges below. These are written before work starts, and no change proceeds without a signed change order.
| Service | Price Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Shower Replacement | $3,000 – $8,500 |
Call (833) 630-4077 for an exact quote – estimates are free.
Book Your Toto Service in Enterprise, NV
Whether you’re repairing a Drake that’s lost its flush, keeping a Washlet through a tub-to-shower conversion, or specifying Toto fixtures into a full bathroom remodel, we’ll put the price in writing before anyone picks up a tool. Free second opinion on any written estimate. Background-checked, uniformed technicians. A live person answers calls 24/7. Call (833) 630-4077 to schedule your free estimate.
Written by the team at Rowan Construction Group Enterprise.












