







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat It Costs to Reface Kitchen Cabinets in Enterprise, NV - and Why the Quote Moves
A refacing quote in Enterprise that starts at $3,800 and ends at $6,200 isn’t a bait-and-switch. It’s a box-condition surprise that a written inspection line item prevents. Cabinet refacing itself is the cheap half of a kitchen change: new doors, drawer fronts, veneer, hardware. The variable nobody quotes up front is what’s underneath - and in Enterprise’s 1990s-to-2010s tract kitchens, what’s underneath is frequently out-of-square particleboard that won’t hold a concealed hinge without reinforcement. Call Rowan Construction Group Enterprise at (833) 630-4077 and the number you sign is the number you pay, because box inspection is a named line item before anyone orders a door.

The Number Most Quotes Leave Out: Box Condition
Refacing keeps your existing cabinet boxes and replaces everything a guest actually sees. That works beautifully when the boxes are solid. It fails when they aren’t.
Enterprise is master-planned tract housing, most of it built between the 1990s and the 2020s, under Clark County permitting rather than city permitting. Builder-grade cabinet boxes from that era were rarely built to last three decades. We open a door on a 2001 kitchen off the southern valley corridor and find low-density particleboard that has swollen near the sink, face frames that have pulled a few degrees out of square, and hinge screw holes that have already been stripped once and filled with toothpicks by a previous owner. It’s common. It’s fixable. And it changes the number.
Under Clause 1 of The Haven Standard, the price is written before anyone starts. That means the box check happens during the estimate, not three days into the job when the crew has already torn off the old doors.
Where the Refacing Dollars Actually Go in Enterprise
Here’s the breakdown of a real refacing scope at Enterprise-area labor rates. These are the line items we write, and the ones you should demand from any other bid.
| Line item | Typical $ range |
|---|---|
| New door and drawer fronts (Wellborn or KraftMaid, thermofoil or wood) | $2,100 - $4,800 |
| Veneer for exposed face frames and side panels | $600 - $1,400 |
| New concealed (European-style) hinges and pulls | $350 - $900 |
| Box reinforcement / substrate repair, per cabinet run | $150 - $400 |
| Box inspection (Phase 1, documented) | $0 added cost |
Add it up and a straightforward reface in Enterprise tends to land in the same neighborhood as a small cabinet installation, roughly $4,000 to $13,000 depending on door style, linear footage and how much substrate work the inspection turns up. That’s the honest range. A quote that comes in well under it either skipped the box check or is planning to find the problem later.

Why Builder-Grade Boxes Fail the Hinge Load Test
European-style concealed hinges hold a door by two or three screws biting into the cabinet’s side panel. The load on those screws is constant, and the door is heavy. On a high-density plywood box, that’s a non-issue. On the low-density particleboard common in Clark County tract kitchens from the 1990s and 2000s, the screw threads strip their own holes over a few years of daily use.
What reinforcement looks like as a written line item: a glue-and-screw cleat or a solid-wood blocking plate added behind the hinge plate, plus squaring the box if it has racked. $150 to $400 per cabinet run covers it in most Enterprise kitchens. It’s not glamorous work, and it never shows on the finished kitchen. It’s also the difference between a reface that holds for fifteen years and one that sags in eighteen months.
When Box Condition Tips the Math Toward Full Replacement
Refacing stops making sense at a crossover point, and it’s worth stating plainly: if the box repair line item on your written quote pushes past roughly 30 to 35 percent of what new KraftMaid semi-custom cabinets would cost for the same run, replacement wins on value. In square footage terms, that’s usually somewhere around 18 to 20 linear feet of cabinet - below that, reface nearly always pencils; above it, the fixed cost of new boxes spread over more footage brings the per-foot price down fast enough that refacing loses its edge.
We’ll price both scenarios on the same written estimate when the inspection says the call is close. No work proceeds on the replacement until the change order is signed. Free second opinion is standing policy too: bring a competitor’s quote and we’ll review it line by line, at no charge, before you commit to anyone.
One Enterprise Detail That Changes the Scope: Clark County Permitting
Cabinet refacing alone doesn’t require a Clark County permit. Relocating a range hood or adding a circuit for an over-range microwave does, and builder-grade kitchens in Enterprise trigger that distinction more often than you’d expect - the original layout frequently has the hood vented to nowhere useful, or the range on a circuit that won’t carry a modern induction unit.
If your reface includes either, we flag the permit requirement on the written scope and quote the permit fee as its own line. It doesn’t get buried in the labor number.
- Phase 1: box inspection, squaring check, hinge load assessment, written findings with photos.
- Phase 2: refacing scope - doors, fronts, veneer, hardware - priced in writing.
- Any substrate repair found mid-job: quoted on a change order you sign before we proceed.
- Every visit: a documented photo record included as standard, not an upgrade.
What to Expect From the Crew
Technicians arrive background-checked and uniformed, and a live person answers the phone around the clock. Our technicians have up to 19 years of experience with the box-and-hinge failures that come with fast-grown tract housing, and the written quote separates inspection from scope every time. If the reface is one piece of a larger job, our Kitchen Remodeling work follows the same discipline: written price, signed change orders, documented record when the crew leaves.
FAQs
Cabinet refacing in Enterprise typically runs $3,800 to $6,500 depending on door style, linear footage and whether the box inspection finds substrate repair that needs a line item. Call (833) 630-4077 for a written price - the inspection is free and the estimate is exact, not a range.
Refacing is cheaper whenever the boxes are sound, and in most Enterprise kitchens under about 18 to 20 linear feet it wins outright. Past that footage, or when box repair exceeds roughly a third of the cost of new KraftMaid semi-custom, replacement pencils better. We price both sides of the crossover on the same written estimate.
No, a straight reface doesn’t require a permit. You do need one if the scope includes relocating a range hood or adding an outlet, and both come up often in Enterprise’s builder-grade kitchens. We name the permit requirement and its fee on the written scope.
Most refacing jobs finish in three to five working days once materials arrive, with door order lead times of two to four weeks ahead of that for Wellborn and KraftMaid fronts. Box reinforcement can add a day. Call (833) 630-4077 and we’ll give you a dated schedule in writing with the price.
Ready to see the real number, substrate repair and all? Call Rowan Construction Group Enterprise at (833) 630-4077 for a free written estimate with a documented box inspection included. The quote you sign is the price you pay, backed by the 365-Day Done Right Promise.
Written by the team at Rowan Construction Group Enterprise, serving Enterprise, NV.
What Our Customers Say
"Fence and retaining wall along a sloped boundary. They photographed the footing depth at each post, which mattered when the county inspector came."
- Iona F."Final invoice was within two percent of the contract. Every change was priced and signed before anyone picked up a tool."
- Malcolm T."Driveway replaced properly with a base that will actually last. They explained why the cheaper quote was cheaper."
- Reggie O.












