







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWalk-In Showers & Shower Remodeling in Enterprise, NV
A walk-in shower remodel in Enterprise, NV typically runs $6,500 to $14,000 for a full tear-out and rebuild, and $2,800 to $6,200 for a curbless conversion that keeps the existing footprint. Most projects take 5 to 9 working days once materials land. We build them for homeowners who want a low-threshold entry, a bench that holds weight, and a waterproofing system that survives a Las Vegas summer of 115°F attic heat cycling through the ceiling above.
Rowan Construction Group Enterprise handles walk-in showers as part of our Bathroom Remodeling trade, and the discipline is the same across every job. You get a flat written price before anyone touches a tile. No work proceeds on a change until the change order is signed. The crew is background-checked and uniformed, and every visit closes with a documented photo record of what we found and what we did. Our technicians have up to 19 years of experience, and they’ve opened enough shower walls in Enterprise to know what’s behind them before the first pry bar goes in.
Call (833) 630-4077 for a free estimate. A live person answers, day or night, and the number we give you is the number that goes in writing.

Key Takeaways
- Full walk-in shower rebuild in Enterprise: $6,500 to $14,000. Curbless conversion with existing footprint: $2,800 to $6,200.
- Enterprise’s water is hard, running roughly 250 to 300 mg/L of calcium carbonate, which kills cheap shower valves and glass finishes faster than most homeowners expect.
- Clark County requires a permit for any shower that relocates the drain or adds a new supply line. We pull it and the inspection record is part of your documentation.
- Every Rowan quote is a flat price with a written scope and written warranty. Free second opinion on any written estimate a competitor has handed you.
When You Need Walk-In Showers & Shower Remodeling
A shower tells you when it’s failing, usually a year before it does real damage. Here are the situations we see most often in Enterprise, and what each one actually means.
- Grout is cracking at the floor-to-wall joint on a repeat schedule. In Enterprise homes built between 1998 and 2012, we regularly see that joint fail because the original builder used mastic instead of a proper waterproofing membrane behind the tile. Re-grouting buys months, not years. The membrane is the fix.
- You’re lifting a leg over a 16-inch tub apron to get in. A tub-to-shower conversion with a 4-inch curb or a fully curbless entry is the standard answer. Homeowners planning to age in place in the 89052 and 89044 zips ask for this most, and it’s the single most common reason we’re called.
- Water stains on the ceiling below the shower. That’s not condensation. It’s a failed pan liner or a failed weep screed at the drain, and it needs to be opened up before it reaches the drywall in the room next door.
- The glass is permanently fogged or the chrome is flaking. Hard water in Enterprise etches glass and pits chrome with surprising speed. A shower with a sealed glass coating and a solid brass valve body holds up; builder-grade acrylic surrounds on a plastic valve do not.
- You’re remodeling for resale and the shower is the weak room. Buyers in this market open shower doors, look at the tile lines, and touch the fixtures. A tired 2005 shower drags down the whole listing, and a walk-in shower with a bench and a niche is a documented upgrade.
- Mold keeps coming back in a windowless bathroom. In a bathroom with no exterior wall and no exhaust fan vented to the outside, moisture has nowhere to go. A shower rebuild is the moment to install a properly vented fan and a mold-resistant substrate instead of paper-faced drywall.

Our Walk-In Showers & Shower Remodeling Process
The order of operations is not negotiable. Every step below produces a document or a decision you can point to later.
- Written price and written scope, before anything else. Under Clause 1 of the Haven Standard, the price is written before anyone starts. We measure the shower, note the drain location and the wall construction, and hand you a flat number with a flat scope. Change orders only proceed when signed. No verbal add-ons, no “we’ll figure it out on site.”
- Permit and inspection. If the drain is moving or a new supply line is going in, Clark County requires a permit. We pull it, the inspector signs off on the rough-in and the pan, and both records join your project file. If your job doesn’t need a permit, we tell you that in writing too.
- Demo and substrate inspection. The crew protects the hallway, pulls the surround or tile, and photographs what’s behind it. We find rot, failed mortar beds, and the occasional surprise drain line more often than anyone likes. The photo record of that discovery goes to you the same day, and if the condition changes the scope, the change order is written and signed before the next hammer swing.
- Waterproofing and pan. A bonded membrane over a sloped mortar bed, with the weep screed at the drain kept clear, is what separates a shower that lasts 25 years from one that leaks in five. We document every stage of the waterproofing before tile goes down, because once it’s covered, nobody can see it again.
- Tile, glass, and fixtures. We set tile, install the niche and bench, and hang glass and a shower valve from brands we quote by name. Kohler and Toto fixtures get specified in the written quote with model numbers, so there’s no mystery about which trim you’re paying for.
- Final walk-through and photo record. We test the drain, check the slope with a level, run the valve through hot and cold, and hand you the closing photo record with the written warranty. You have evidence of what was built, not a promise that it was.
Walk-In Showers & Shower Remodeling Pricing in Enterprise
Here’s the honest range, in dollars. We’d rather you screenshot this and compare it against any other quote you collect than sit through a sales pitch.
| Scope | Typical Price Range | Timeline |
|---|---|---|
| Curbless conversion, existing footprint, new tile and glass | $2,800 – $6,200 | 4 – 6 working days |
| Full tear-out and rebuild, tile to ceiling, bench and niche | $6,500 – $14,000 | 5 – 9 working days |
| High-end walk-in with frameless glass, linear drain, premium fixtures | $14,000 – $22,000 | 7 – 12 working days |
| Wall relocation or supply line addition (add to base scope) | $1,500 – $4,500 | 1 – 3 extra days |
| Glass-only replacement (frameless panel and door) | $900 – $2,400 | 1 day |
What moves the number most: the waterproofing system you choose, whether the drain is a linear channel that needs reframing or a standard center drain, the glass (frameless .5-inch tempered glass runs more than a framed enclosure by a wide margin), and whether the wall behind the tile needs replacement. Enterprise’s heat and hard water both shorten the life of cheap materials, and the cheap materials are what most “lowest price” quotes contain.
Sourcing from our fifty-plus vetted brands is how we keep the quote honest rather than inflated. The written quote specifies fixture brands and models, so you can price-check every line item yourself. If a competitor has already handed you a written estimate, we’ll review it line by line at no charge as a free second opinion.
Call (833) 630-4077 for a flat written price on your shower. Estimates are free, and the number is on paper before work starts.
For the full picture of what a bathroom project includes – vanities, flooring, ventilation, and the plumbing behind the walls – see our Bathroom Remodeling in Enterprise service page. If your project is part of a larger renovation, our home page lays out the seven trades we handle under The Haven Standard.
We also work in nearby markets. Homeowners comparing walk-in shower costs in Henderson, Las Vegas, North Las Vegas, and Summerlin ask the same questions and get the same written prices. If your project includes structural changes, our home additions trade handles the framing and the permit. For shower module installations in new construction, we specify brands like Cover and Mighty Buildings where the site conditions call for a prefabricated wet core. Our shower remodel guide for the Henderson corridor walks through glass specifications in more detail.
FAQs – Walk-In Showers & Shower Remodeling
How much does a walk-in shower remodel cost in Enterprise?
A walk-in shower remodel in Enterprise typically costs $6,500 to $14,000 for a full tear-out and rebuild, or $2,800 to $6,200 for a curbless conversion that keeps the existing footprint and drain location. High-end builds with frameless glass, linear drains, and premium fixtures run $14,000 to $22,000. The biggest variables are the waterproofing system, whether the wall needs rebuilding, and the glass specification. Call (833) 630-4077 for an exact flat price written on paper before work starts.
Is it cheaper to remodel the shower or replace the whole bathroom?
A shower-only remodel is almost always cheaper than a full bathroom remodel. A shower rebuild alone runs $6,500 to $14,000; a full bathroom remodel that includes the vanity, flooring, toilet, lighting, and the same shower scope typically adds $8,000 to $18,000 on top. If the rest of the fixtures are sound and the layout works, the shower is the right scope. Call (833) 630-4077 and we’ll tell you honestly which one your bathroom needs.
How long does a walk-in shower remodel take in Enterprise?
A walk-in shower remodel in Enterprise typically takes 5 to 9 working days from demo to final walk-through, once materials are on site. Curbless conversions that keep the existing drain location can finish in 4 to 6 days. Projects that move the drain, relocate a wall, or add a supply line require a Clark County permit and an inspection, which adds 1 to 3 days for the rough-in sign-off. Call (833) 630-4077 for a schedule with your written quote.
Do I need a permit to convert my tub to a walk-in shower in Enterprise?
Yes, Clark County requires a permit if the project moves the drain, changes the plumbing, or alters the waterproofing footprint. A straight tile-and-surround replacement that keeps the existing valve and drain may not require one, and we tell you which category your job falls into before quoting. The permit and inspection records become part of your project file. Call (833) 630-4077 for a free walk-through and a straight answer.
Why do Enterprise showers fail faster than showers in other markets?
Enterprise showers fail faster because of hard water and extreme heat cycling. The water carries roughly 250 to 300 mg/L of calcium carbonate, which etches glass and wears out valve cartridges on a shorter schedule than soft-water markets. Summer attic temperatures that climb past 130°F stress the seals and gaskets behind the shower wall. A proper waterproofing membrane, a solid brass valve, and a sealed glass coating are what make a shower last here. Call (833) 630-4077 and we’ll spec those into your written quote.
Bring a competitor’s written estimate to the call and we’ll review it line by line at no charge. If it’s missing the waterproofing system, the permit, the glass specification, or the fixture model numbers, you’ll see that on the page. That’s the free second opinion, and there’s no charge for it.
Rowan Construction Group Enterprise | (833) 630-4077 | Free estimates, flat written prices, and a documented photo record on every visit. The 365-Day Done Right Promise is printed on every page and backed by our terms, not an asterisk.
Written by the team at Rowan Construction Group Enterprise, serving Enterprise.


