







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterVanities, Tile & Fixtures in Enterprise, NV
A vanity replacement in Enterprise typically runs $450 to $1,400 for the unit and installation, floor tile lands between $7 and $18 per square foot installed, and a new faucet or shower trim set costs $180 to $650 depending on finish and brand. Vanities, tile and fixtures are the three surfaces a bathroom is actually judged by, and they are also the three places a cheap install shows itself first. We’re Rowan Construction Group, and we put the price in writing before anything is ordered or lifted off the truck. Our technicians bring up to 19 years of experience to every job, and every visit ends with a photo record of what we found and what we installed.
This work usually sits inside a larger scope, so it’s worth reading our Bathroom Remodeling in Enterprise page first to see how the trades line up, or the general Bathroom Remodeling overview if you’re still deciding how much to change. Either way, the number gets written down before the first box is opened. Call (833) 630-4077 and we’ll talk through your bathroom, not a script.

When You Need Vanities, Tile & Fixtures
Enterprise bathrooms built between 1995 and 2010 share a handful of failure patterns, and most homeowners call us at exactly the point where the cosmetic problem turns structural. Here’s what we see most often:
- Grout that crumbles when you scrub it. In Enterprise, the dry desert air pulls moisture out of grout lines fast, so hairline cracks widen over a couple of summers. Once water gets behind the tile, the backerboard is already compromised and patching grout only hides it for a season.
- A vanity whose cabinet box has swollen at the base. Toe-kick swelling almost always means a slow supply-line or drain leak has been wicking into the particleboard for months. A new cabinet door won’t fix that; the leak and the box both have to go.
- Hollow or loose floor tile near the shower. A tile that sounds hollow when tapped has lost its bond to the thinset, usually because the subfloor flexes or the original install skipped a crack-isolation membrane. It’s a re-tile, not a re-grout.
- Fixtures that are dated and out of parts. Builder-grade two-handle faucets from the mid-2000s often share a cartridge that’s no longer stocked. Kohler and Toto both make direct-fit replacements, and swapping the whole fixture is frequently cheaper than chasing the part.
- Mismatched finishes after a partial update. You replaced the showerhead but the valve trim, tub spout and sink faucet are still brushed nickel from a different decade. Matching the finish across all three points reads as one coherent bathroom instead of three separate projects.
- A guest bath you’re about to list or rent out. Vanity, floor tile and fixtures are the three line items buyers and renters notice within the first ten seconds in a doorway. It’s the highest-return square footage in the house.
Our Vanities, Tile & Fixtures Process
- Measure and document the room as it is. We photograph the existing vanity, the tile field, the valve and the drain locations, and we check the substrate under the floor. Under Clause 1 of the Haven Standard, the written price depends on what’s actually there, so we don’t guess from the doorway.
- Write the scope and the flat price. You get a written scope naming the vanity size and brand, the tile series and square footage, and the fixture models with finishes, plus a written warranty and a flat price. No work starts until you’ve signed it.
- Order materials against the signed list. We source through more than fifty vetted brands, so the quote carries honest numbers instead of inflated ones. If a vanity or tile series runs into a lead-time problem, you hear it from us before it becomes a schedule surprise, and any change gets a signed change order first.
- Demo and prep the substrate. The old vanity, tile and fixtures come out, and we inspect what’s underneath. A tile membrane goes down before any new floor tile in a wet area; that’s the layer most cheap installs skip, and it’s the reason a floor fails in three years instead of fifteen.
- Set the tile, hang the vanity, install the fixtures. Floor tile gets leveled and grouted, the vanity is shimmed and secured to the wall framing, and the faucet, drain, valve trim and showerhead go in with new supply lines. Background-checked, uniformed technicians do every one of these steps.
- Walk it, photograph it, hand over the record. You get a documented photo record of the substrate, the membrane, the plumbing connections and the finished install, plus the written warranty. If anything isn’t right within 365 days, our 365-Day Done Right Promise means we come back and make it right.

Vanities, Tile & Fixtures Pricing in Enterprise
Bathroom fixture and finish work in Enterprise runs from a few hundred dollars for a single faucet swap to several thousand for a full vanity, floor tile and fixture package. These ranges reflect what we actually quote in this market:
| Line item | Typical range | What moves the number |
|---|---|---|
| Vanity, single sink, installed | $450 – $1,400 | Cabinet construction (plywood vs. particleboard), countertop material, sink style |
| Vanity, double sink, installed | $900 – $2,600 | Width, countertop edge profile, dual plumbing rough-in |
| Porcelain or ceramic floor tile | $7 – $18 / sq ft | Tile format, membrane requirement, subfloor prep |
| Shower wall tile | $12 – $28 / sq ft | Membrane and waterproofing, niche count, tile size |
| Sink faucet, installed | $180 – $520 | Brand, finish, valve replacement if the old one fails |
| Shower valve and trim set | $280 – $750 | Pressure-balance vs. thermostatic, finish, wall access |
| Toilet, installed | $320 – $780 | Model, rough-in distance, flange condition |
| Countertop, cultured marble or quartz | $240 – $900 | Material, edge, integrated vs. undermount sink |
Two things reliably push a quote up. The first is what’s under the old tile: a failed backerboard or a subfloor that flexes means prep work before anything new goes down, and we’d rather show you that in the written scope than discover it mid-job. The second is fixture brand and finish, and this is where naming the brand in the quote matters. A Kohler or Toto valve set costs more than a hardware-store equivalent, and it also lasts through a decade of Enterprise’s hard water without a cartridge hunt. We name the brand and the model so the number means something.
We offer a free second opinion on any written estimate. Bring a competitor’s quote and we’ll review it line by line at no charge, which is often how a homeowner finds out a low price was missing the tile membrane or the new supply lines. There’s no urgency theatre here and no “call for a quote” step; the price is written before work starts, every time.
What should you check before choosing a tile or vanity brand?
Check the warranty terms and the parts availability, not the showroom display. For vanities, ask whether the cabinet box is plywood or particleboard; plywood holds up to a slow leak far better in a dry climate where the wood expands and contracts across the seasons. For tile, ask what the membrane spec is, because the tile itself rarely fails but the waterproofing under it does. For fixtures, ask whether replacement cartridges are still stocked. When clients want a current, contemporary look and ask us to coordinate with modular or prefab suppliers, we’ve reviewed specs from Cover, Dvele and Mighty Buildings, and we know which of their product lines are actually built for a permanent install versus a temporary one.
FAQs – Vanities, Tile & Fixtures
How much does a bathroom vanity cost in Enterprise, NV?
A single-sink vanity installed in Enterprise typically costs $450 to $1,400, and a double-sink vanity runs $900 to $2,600. The cabinet construction, countertop material and sink style drive most of the difference. Call (833) 630-4077 for an exact written quote; estimates are free.
Can you replace just the tile and fixtures without a full remodel?
Yes. We regularly do tile-only and fixture-only jobs when the layout, plumbing rough-in and cabinet footprint stay the same. If the subfloor or shower waterproofing has failed, we’ll tell you that in writing before we start rather than tiling over a problem. Call (833) 630-4077 and we’ll walk you through what your bathroom actually needs.
Is it cheaper to repair or replace a vanity?
Replace, in most Enterprise cases, once the cabinet box has swollen or the finish has delaminated. Repair is only worth it when the box is solid plywood and the damage is limited to a door, drawer front or hardware. A quote that names the cabinet construction tells you which path you’re on. Call (833) 630-4077 for a free assessment.
How long does vanity, tile and fixture work take?
A fixture swap is a single visit; a vanity replacement is usually one to two days; floor and shower tile with membrane work runs three to six days depending on square footage and dry time. We put the schedule in the written scope so you know what to expect before the crew arrives. Call (833) 630-4077 to get your timeline in writing.
What happens if something isn’t right after the install?
We come back and make it right under our 365-Day Done Right Promise, which is backed by a written terms page rather than a handshake. Every visit also includes a documented photo record as a standard deliverable, so you have evidence of what was found and what was done. Call (833) 630-4077 if you have a concern.
Related Pages
- Bathroom Remodeling in Enterprise – the parent service and the full scope picture
- Rowan Construction Group – how the Haven Standard works across all seven trades
- Kitchen Remodeling – cabinets and countertops with the same written-price discipline
- Roofing – GAF and Owens Corning systems quoted in writing
- Windows and Doors – a common pairing with a bathroom update
- Fence Installation – Belgard and matching finish work
- Driveway and Pavers – Techo-Bloc and Belgard surfaces
- Home Additions – when the bathroom needs more square footage
- Bathroom Remodeling in Henderson – a nearby service area
- Bathroom Remodeling in Las Vegas – a nearby service area
- Bathroom Remodeling in North Las Vegas – a nearby service area
- Bathroom Remodeling in Spring Valley – a nearby service area
Ready to Get the Number in Writing?
Vanity, tile and fixture work is judged at a glance, so the install details matter as much as the finish you picked. We’ll measure what’s there, put the flat price and the named brands in writing, and leave you with a photo record and a 365-day guarantee. Call Rowan Construction Group at (833) 630-4077 for a free estimate in Enterprise, and bring a competitor’s quote if you have one; we’ll review it line by line at no charge.
Written by the team at Rowan Construction Group Enterprise, serving Enterprise.


